1. Home
  2. Modules
  3. Asset accounting

SAP Asset Accounting (FI-AA): the life of a fixed asset

Asset Accounting (FI-AA) is the subledger of SAP Finance that keeps one record per fixed asset, from the day it is bought until it is sold or scrapped, and values it under every set of accounting rules the company reports in. This guide follows one machine through its life, shows the journal entry behind each step, lets you play with depreciation in two ledgers, and collects the documented tricks that save hours at month end and year end.

  • SAP S/4HANA
  • SAP ERP (ECC)
  • SAP S/4HANA Cloud Public Edition
  • AW01N
  • AFAB
Read this page as
Switch to Consultant for Customizing, transaction types and tables.Showing Customizing, transaction types and tables.

What FI-AA is

Six building blocks, from country rules to the ledger

Every asset sits at the bottom of a small hierarchy. Country rules come first, the company code picks them up, the asset class gives each asset its defaults, and the depreciation areas hold the values that reach the ledgers. Pick a level to see what it does and where it lives.

Building block

Level 1 of 6

Chart of depreciation

A chart of depreciation holds the legal rules for valuing assets in one country. SAP ships country reference charts that are not used directly: you copy one, keep the depreciation areas you need and delete the rest. Several company codes of the same country can share one chart (in SAP S/4HANA only if they use the same non-leading ledgers and parallel currencies).

Where you see it

Only in Customizing. Users meet it indirectly, through the depreciation areas and keys it contains.

Under the hood

Depreciation keys are defined per chart of depreciation. Copying a reference chart also copies old transaction-type restrictions stored in table TABWA, a leftover from classic Asset Accounting: SAP says to check TABWA after copying and delete the restrictions you do not need, because new Asset Accounting only needs them for revaluation and investment support.

  • TABWA

Customizing transactions and tables for this level are in the Consultant view.

Sources: SAP Learning, organizational structuresSAP Learning, how depreciation areas post

Level 2 of 6

Company code

An FI company code can be used in Asset Accounting only after a chart of depreciation is assigned to it. Each company code has one chart of accounts and one chart of depreciation. Several company codes can share a chart of depreciation, but in SAP S/4HANA only if they use the same non-leading ledgers and parallel currencies.

Where you see it

Customizing for Asset Accounting, Organizational Structures.

  • OAOB

Under the hood

Every ledger the company code posts to must be represented by a depreciation area, and the parallel currencies in Asset Accounting must match those of the general ledger. Assigning a chart of depreciation to an existing company code in OAOB can fail with AC481, inconsistency between FI company code and chart of depreciation (KBA 2603041).

  • OAOB
  • AC481

Customizing transactions and tables for this level are in the Consultant view.

Sources: SAP Learning, how depreciation areas postKBA 2603041

Level 3 of 6

Asset class

Every asset belongs to exactly one asset class, and assets that go to different balance sheet items need different classes. The class supplies the account determination, the screen layout, the number range and default depreciation terms. Assets under construction and low-value assets get classes of their own.

Where you see it

When you create an asset, you pick the class first and the class fills in the defaults.

  • OAOA

Under the hood

Classes are created at client level and can serve several charts of depreciation. Per class and chart, OAYZ decides which depreciation areas the class uses. The account determination key works per chart of accounts, not per chart of depreciation.

  • OAOA
  • OAYZ

Customizing transactions and tables for this level are in the Consultant view.

Sources: SAP Learning, asset classesSAP Help (R/3), areas in the asset classSAP Help (ERP), account determination

Level 4 of 6

Asset

The asset master record carries the description, the time-dependent assignments such as the cost center, and the depreciation terms per area. A main number can have subnumbers (1000-0, 1000-1…) for later acquisitions, parts or technical splits.

Where you see it

Create and change assets with AS01 and AS02 in SAP GUI, or with the Manage Fixed Assets app from SAP S/4HANA 1709.

  • AS01
  • AS02
  • Manage Fixed Assets F1684

Under the hood

The capitalization date and the depreciation start are derived from the first acquisition and the period control, not typed in. If a new time-dependent cost center derives a different profit center or segment, saving the asset posts a transfer automatically.

  • ANLA
  • ANLZ

Customizing transactions and tables for this level are in the Consultant view.

Sources: SAP Learning, master dataKBA 1789106SAP Learning, correcting capitalized assetsSAP blog, what is new in 2020

Level 5 of 6

Depreciation areas

A depreciation area holds one set of values for the asset, such as book, tax, cost accounting, IFRS or local GAAP; one valuation can need one or more areas. The key has two digits, so a chart of depreciation can hold up to 99 areas. A real area keeps its own values; a derived area is calculated from real areas.

Where you see it

In the Asset Explorer you switch between areas in the left-hand tree.

  • AW01N

Under the hood

Each area has a posting indicator. SAP’s S/4HANA course lists four: does not post, posts in real time, posts depreciation only, and posts APC immediately with depreciation periodically. Every area needs an accounting principle, even a non-posting one.

  • OADB
  • OABC
  • OABD

Customizing transactions and tables for this level are in the Consultant view.

Sources: SAP Learning, depreciation keys and areasSAP Learning, organizational structuresSAP Learning, how depreciation areas postSAP Learning, parallel accounting

Level 6 of 6

Ledgers and G/L accounts

Each depreciation area is tied to an accounting principle, the principle to a ledger group, and account determination decides which G/L accounts each transaction hits. In SAP S/4HANA the asset postings land in the Universal Journal together with the rest of Finance.

Where you see it

Journal entries show the asset number. Asset balances and the asset history sheet read the same data.

  • Asset Balances F1617
  • Asset History Sheet F1615

Under the hood

Accounts are assigned per chart of accounts, account determination key and depreciation area. Integrated acquisitions also need a technical clearing account, which must be a balance sheet account set up as an asset reconciliation account and must not appear in Asset Accounting account determination.

  • AO90
  • ACDOCA

Customizing transactions and tables for this level are in the Consultant view.

Sources: SAP Learning, processing acquisitionsSAP Help (ERP), account determinationKBA 2804196 (AO90)

Step by step

Follow one machine from purchase to scrap

One packaging machine, bought for 120,000 in January 2026 and valued in two ledgers: ledger 0L depreciates it over 10 years, ledger 2L over 5. Pick a step to see what happens, where you do it and the journal entry it creates. Amounts, accounts and useful lives are an example, not a rule.

Step of the asset’s life
Journal entries of ledger

What happens · step 1 of 6

Create the asset

You create the asset in the class Machinery. The class proposes the depreciation key and useful life for each area, and you add the description and the cost center. Nothing is posted: the master record holds no value until the first acquisition.

Where you do it

AS01 in SAP GUI, or the Manage Fixed Assets app.

  • AS01
  • Manage Fixed Assets F1684

The journal entry

No journal entry yet.

Create the asset: journal entry
AccountDebitCredit
Nothing is postedThe asset exists, with value 0 in every area——

The capitalization date and the depreciation start date are filled in later, from the asset value date of the first acquisition and the period control in the depreciation key.

Under the hood

The asset class supplies account determination, screen layout and number range. A depreciation start date typed in by hand that lies before the first acquisition has no effect (KBA 1789106).

  • OAOA
  • OAYZ

Transaction types, Customizing and tables for this step are in the Consultant view.

Sources: SAP Learning, master dataKBA 1789106

What happens · step 2 of 6

Buy it

The supplier invoice is posted with the asset as the account. In SAP S/4HANA this creates one operational document for the invoice, valid for all ledgers, plus one valuating document per accounting principle that capitalizes the asset. A technical clearing account sits between them and always nets to zero.

Where you do it

F-90, shown in SAP Fiori as Post Acquisition (Integrated AP) without Purchase Order. With a purchase order, the PO item uses account assignment category A and the asset is capitalized at goods receipt, or at invoice receipt when the goods receipt is non-valuated.

  • F-90

The journal entry

Operational document once, then a valuating document in this ledger.

Buy it: journal entry, ledger 0L
AccountDebitCredit
Technical clearing accountOperational document (all ledgers)120,000
SupplierOperational document (all ledgers)120,000
Machinery: acquisition and production costsValuating document, ledger 0L120,000
Technical clearing accountValuating document, ledger 0L120,000
Buy it: journal entry, ledger 2L
AccountDebitCredit
Technical clearing accountOperational document (all ledgers)120,000
SupplierOperational document (all ledgers)120,000
Machinery: acquisition and production costsValuating document, ledger 2L120,000
Technical clearing accountValuating document, ledger 2L120,000

Input tax, if any, posts in the operational document. Only the valuating documents change the asset values; the clearing account ends at zero in each ledger.

Under the hood

Transaction type 100, external acquisition. The asset value date must be in the same fiscal year as the posting date (error AAPO126 otherwise). Without AP integration, ABZON posts the asset against a clearing account with an automatic offsetting entry.

  • 100
  • ABZON

Transaction types, Customizing and tables for this step are in the Consultant view.

Sources: SAP Learning, processing acquisitionsSAP Learning, posting acquisitionsSAP Learning, MM integrationSAP blog, key aspectsKBA 2950011

What happens · step 3 of 6

Depreciate it

Planned depreciation is already calculated: the system recalculates it whenever the asset changes. Once a month the depreciation run posts the planned amount of the period to every ledger. Here, January 2026 posts 1,000 in ledger 0L (120,000 over 10 years) and 2,000 in ledger 2L (over 5 years).

Where you do it

AFAB in SAP GUI, or a Depreciation Posting Run job in the Schedule Asset Accounting Jobs app. Always run a test first: a posted run cannot be reversed. Running it again for the same period posts the difference as a separate journal entry (a repeat run).

  • AFAB
  • Schedule Asset Accounting Jobs F1914

The journal entry

Depreciation run for period 01/2026.

Depreciate it: journal entry, ledger 0L
AccountDebitCredit
Depreciation expenseCost center from the asset1,000
Machinery: accumulated depreciationLedger 0L, 10 years1,000
Depreciate it: journal entry, ledger 2L
AccountDebitCredit
Depreciation expenseCost center from the asset2,000
Machinery: accumulated depreciationLedger 2L, 5 years2,000

Depreciation documents use document type AF. A full year in this example: 12,000 in ledger 0L and 24,000 in ledger 2L.

Under the hood

In SAP S/4HANA the run is program FAA_DEPRECIATION_POST and its log is program RAPOST2001. Posting cycles per area are set in OAYR. SAP PRESS notes that online processing is limited to 1,000 assets and that the update run goes to the background, where SM37 monitors it.

  • FAA_DEPRECIATION_POST
  • RAPOST2001
  • OAYR

Transaction types, Customizing and tables for this step are in the Consultant view.

Sources: SAP Learning, depreciation keys and postingSAP Learning, performing a depreciation runSAP PRESS, depreciation runs

What happens · step 4 of 6

Move it

Two years later the machine is reclassified to Plant equipment, which uses other G/L accounts. A transfer within the company code moves the acquisition cost and the accumulated depreciation together to a new asset. Ledger 0L has written off 24,000 by then, ledger 2L 48,000.

Where you do it

ABUMN in SAP GUI. Transfers within a company code use transfer variant 4.

  • ABUMN

The journal entry

Transfer on 1 January 2028, gross method.

Move it: journal entry, ledger 0L
AccountDebitCredit
Plant equipment: acquisition and production costsReceiving asset120,000
Machinery: acquisition and production costsSending asset120,000
Machinery: accumulated depreciationSending asset24,000
Plant equipment: accumulated depreciationReceiving asset24,000
Move it: journal entry, ledger 2L
AccountDebitCredit
Plant equipment: acquisition and production costsReceiving asset120,000
Machinery: acquisition and production costsSending asset120,000
Machinery: accumulated depreciationSending asset48,000
Plant equipment: accumulated depreciationReceiving asset48,000

The book value does not change: 96,000 in ledger 0L and 72,000 in ledger 2L, now under the new class. The example assumes the receiving asset keeps the same useful lives.

Under the hood

Transaction types 300 (retirement transfer of a prior-year acquisition) and 310 (the acquiring side). Current-year acquisitions use 320 and 330. Transfers between company codes use ABT1N, with transfer variants and the gross, net or new-value method.

  • 300
  • 310
  • ABT1N

Transaction types, Customizing and tables for this step are in the Consultant view.

Sources: SAP Learning, transfersSAP Learning, correcting capitalized assetsKBA 2867935 (ABUMN)

What happens · step 5 of 6

Sell it

On 1 January 2029 the machine is sold for 70,000. The same sale gives a loss of 14,000 in ledger 0L (book value 84,000) and a gain of 22,000 in ledger 2L (book value 48,000). The system works out the depreciation up to the period that the period control derives from the asset value date, using the planned values, so the depreciation run does not have to be posted first.

Where you do it

F-92 posts the customer invoice and the retirement together; in Fiori, the Post Asset Retirement app can also post revenue and retirement in one step. ABAON sells without a customer, ABAVN scraps.

  • F-92
  • ABAON
  • ABAVN

The journal entry

Sale and retirement on 1 January 2029, simplified. With pro rata at period start, 2029 gets no depreciation.

Sell it: journal entry, ledger 0L
AccountDebitCredit
CustomerRevenue 70,000, tax left out70,000
Plant equipment: accumulated depreciationThree years at 12,00036,000
Loss on asset retirementBook value 84,000 minus revenue14,000
Plant equipment: acquisition and production costsAsset leaves the books120,000
Sell it: journal entry, ledger 2L
AccountDebitCredit
CustomerRevenue 70,000, tax left out70,000
Plant equipment: accumulated depreciationThree years at 24,00072,000
Plant equipment: acquisition and production costsAsset leaves the books120,000
Gain on asset retirementRevenue minus book value 48,00022,000

Simplified to the net effect. The real documents also carry the revenue line and the revenue clearing entry the system creates; they are left out here.

Under the hood

Transaction type 210, retirement with revenue of a prior-year acquisition (260 for current-year acquisitions; 200 and 250 without revenue). On the revenue line the user flags Asset Retirement and enters the asset, transaction type and value date.

  • 210
  • 260
  • 200

Transaction types, Customizing and tables for this step are in the Consultant view.

Sources: SAP Learning, retirementsSAP Learning, integrated retirementsKBA 2512526

What happens · step 6 of 6

Close the year

When depreciation is fully posted and nothing is incomplete, the year-end closing sets the last closed fiscal year per depreciation area and blocks postings into it. Asset Accounting is closed before the general ledger year. The balance carryforward opens the following year.

Where you do it

AJAB in SAP GUI. In SAP S/4HANA 2023 it opens Year-End Closing Asset Accounting (Cross-Company Code and Ledger): company code and ledger ranges, the fiscal year and a test run. The same closing runs as a job template in Schedule Asset Accounting Jobs.

  • AJAB
  • FAGLGVTR
  • Schedule Asset Accounting Jobs F1914

The journal entry

No journal entry: closing only sets a status.

Close the year: journal entry
AccountDebitCredit
Nothing is postedThe fiscal year is marked as closed per area——

SAP’s Cloud Public Edition course adds that only the last closed year can be reopened, and that a year certified by an external auditor must not be reopened.

Under the hood

In SAP ERP, AJAB runs program RAJABS00 per company code. SAP’s blogs date the change: from 1909 FAA_CMP can also close per ledger or depreciation area, and from 2020 AJAB is redirected to the new transaction FAA_CLOSE_FISC_YEARS. In SAP S/4HANA 2023 the program behind AJAB is FAA_CLOSE_FISCAL_YEARS.

  • RAJABS00
  • FAA_CMP
  • FAA_CLOSE_FISC_YEARS
  • FAA_CLOSE_FISCAL_YEARS

Transaction types, Customizing and tables for this step are in the Consultant view.

Sources: SAP Learning, fiscal year change and closingSAP Learning, year-end closing (cloud)SAP blog, what is new in 2020KBA 2816495

Parallel valuation

One asset, many values: depreciation areas and ledgers

Most companies value the same machine more than once: for the group’s IFRS accounts, for local accounting and tax, sometimes for cost accounting. Each valuation is a depreciation area. What changed most from SAP ERP to SAP S/4HANA is how those values reach the general ledger. Switch the release to compare.

Release

Classic Asset Accounting in SAP ERP: one area posts online, the others follow later

1Valuation

  • Book valuationExample: area 01
  • Parallel valuationExample: IFRS next to local books

2How it reaches the G/L

  • Area 01 posts onlineThe master area, normally the one that posts online
  • Other areas post periodicallyReport RAPERB2000 (transaction ASKB), or directly when set

3Keeping it consistent

  • Real plus derived areaLedger approach with new G/L: a derived area posts the difference
  • Reconciliation reportRAABST02 (ABST2) lists accounts where G/L and assets differ
  • Only one area onlinePer chart of depreciation, only one area could post to FI automatically online; exceptions were investment support on the liabilities side and revaluation-only areas.
  • Area 01 was specialLegacy values were entered there first, its currency had to be the company code currency, and it could not be deleted.
  • New Asset Accounting came first to ERPFrom enhancement package 7, support package 02, business function FIN_AA_PARALLEL_VAL switches SAP ERP to new Asset Accounting, the model SAP S/4HANA makes mandatory.

Sources: SAP Help (ERP), parallel valuationSAP Help (ERP), automatic postingSAP Help (ERP), chart of depreciationKBA 2341498KBA 2032547

Ledger approach in SAP S/4HANA: every valuation posts full values, in real time, to its own ledger

1Accounting principle

  • IFRSExample: the group valuation
  • Local GAAPExample: the statutory valuation

2Ledger group

  • 0L · leading ledgerIFRS documents
  • 2L · non-leading ledgerLocal GAAP documents

3Depreciation area (example numbers)

  • Area 01 · posts in real timeIFRS: APC at once, depreciation through the run
  • Area 30 · posts in real timeLocal GAAP: APC at once, depreciation through the run
  • Area 32 · does not postA reporting area still needs an accounting principle
  • No leading areaAll depreciation areas have equal status. Area 01 does not have to belong to ledger 0L.
  • Full values, not deltasParallel valuations post their full values in real time, with a separate document per accounting principle. Depreciation itself still posts through the periodic run.
  • One clearing account in the middleIntegrated acquisitions post one operational document and one valuating document per accounting principle, both against the technical clearing account.

Sources: SAP Learning, parallel accountingSAP Learning, how depreciation areas postSAP Learning, processing acquisitions

Try it

Depreciation lab: two ledgers, one machine

SAP calculates depreciation from a depreciation key, which combines a base method, a declining-balance method, a maximum amount method, a multilevel method and a period control method. The lab keeps the simplest of them, straight-line over the useful life, with three of SAP’s period controls for the first year. Change the numbers: both areas start from the same acquisition value, and the gap column is what the two ledgers disagree on.

Planned values · simulationlike AW01N

120,000 · January 2026 · Pro rata at period start · 10 and 5 years

Year 1 · area 01
12,000
Year 1 · area 30
24,000
Fully depreciated
2035 · 2030
Largest gap
60,000 in 2030
030k60k90k120kStart2026202720282029203020312032203320342035
Depreciation and book value per year in both areas
YearArea 01 · 10 yearsBook valueArea 30 · 5 yearsBook valueGap
202612,000108,00024,00096,00012,000
202712,00096,00024,00072,00024,000
202812,00084,00024,00048,00036,000
202912,00072,00024,00024,00048,000
203012,00060,00024,000060,000
203112,00048,000–048,000
203212,00036,000–036,000
203312,00024,000–024,000
203412,00012,000–012,000
203512,0000–00

Simplified illustration, rounded to whole units: straight-line from the acquisition value over the useful life of each area. Real depreciation keys can add declining-balance phases, maximum amounts, scrap values, curbs and more.

Sources: SAP Learning, depreciation keysSAP Help (ERP), period controlSAP Help (R/3 4.70), half-year convention

Periodic processing

The asset year, month by month

Asset Accounting runs on a steady rhythm: settle and depreciate every month, then close the old year and open the new one. Pick a period to see what belongs to it, and switch the release to see what SAP S/4HANA dropped.

Release
Period

Period 01 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets, only items with a distribution rule.
  • AFAB Post depreciationThe run posts the planned depreciation of the period to every ledger.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 01 · new year

Open the year first

In SAP ERP, Asset Accounting needs its own fiscal year change before the first asset posting of the new year.

  • AJRW Open the new year in Asset AccountingClassic fiscal year change, before any asset posting to the new year. The G/L balance carryforward is a separate run.
  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets.
  • AFAB Post depreciationPosts depreciation of the areas that post to the G/L.
  • ASKB Periodic APC postingPosts the values of areas set to post periodically, report RAPERB2000.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 02 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets, only items with a distribution rule.
  • AFAB Post depreciationThe run posts the planned depreciation of the period to every ledger.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 02 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets.
  • AFAB Post depreciationPosts depreciation of the areas that post to the G/L.
  • ASKB Periodic APC postingPosts the values of areas set to post periodically, report RAPERB2000.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 03 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets, only items with a distribution rule.
  • AFAB Post depreciationThe run posts the planned depreciation of the period to every ledger.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 03 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets.
  • AFAB Post depreciationPosts depreciation of the areas that post to the G/L.
  • ASKB Periodic APC postingPosts the values of areas set to post periodically, report RAPERB2000.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 04 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets, only items with a distribution rule.
  • AFAB Post depreciationThe run posts the planned depreciation of the period to every ledger.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 04 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets.
  • AFAB Post depreciationPosts depreciation of the areas that post to the G/L.
  • ASKB Periodic APC postingPosts the values of areas set to post periodically, report RAPERB2000.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 05 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets, only items with a distribution rule.
  • AFAB Post depreciationThe run posts the planned depreciation of the period to every ledger.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 05 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets.
  • AFAB Post depreciationPosts depreciation of the areas that post to the G/L.
  • ASKB Periodic APC postingPosts the values of areas set to post periodically, report RAPERB2000.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 06 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets, only items with a distribution rule.
  • AFAB Post depreciationThe run posts the planned depreciation of the period to every ledger.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 06 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets.
  • AFAB Post depreciationPosts depreciation of the areas that post to the G/L.
  • ASKB Periodic APC postingPosts the values of areas set to post periodically, report RAPERB2000.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 07 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets, only items with a distribution rule.
  • AFAB Post depreciationThe run posts the planned depreciation of the period to every ledger.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 07 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets.
  • AFAB Post depreciationPosts depreciation of the areas that post to the G/L.
  • ASKB Periodic APC postingPosts the values of areas set to post periodically, report RAPERB2000.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 08 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets, only items with a distribution rule.
  • AFAB Post depreciationThe run posts the planned depreciation of the period to every ledger.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 08 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets.
  • AFAB Post depreciationPosts depreciation of the areas that post to the G/L.
  • ASKB Periodic APC postingPosts the values of areas set to post periodically, report RAPERB2000.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 09 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets, only items with a distribution rule.
  • AFAB Post depreciationThe run posts the planned depreciation of the period to every ledger.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 09 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets.
  • AFAB Post depreciationPosts depreciation of the areas that post to the G/L.
  • ASKB Periodic APC postingPosts the values of areas set to post periodically, report RAPERB2000.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 10 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets, only items with a distribution rule.
  • AFAB Post depreciationThe run posts the planned depreciation of the period to every ledger.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 10 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets.
  • AFAB Post depreciationPosts depreciation of the areas that post to the G/L.
  • ASKB Periodic APC postingPosts the values of areas set to post periodically, report RAPERB2000.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 11 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets, only items with a distribution rule.
  • AFAB Post depreciationThe run posts the planned depreciation of the period to every ledger.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 11 · routine month

Settle, depreciate, check

A normal month: the depreciation run posts the plan, assets under construction are settled when they go into use, and the Asset Explorer answers questions about any single asset.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets.
  • AFAB Post depreciationPosts depreciation of the areas that post to the G/L.
  • ASKB Periodic APC postingPosts the values of areas set to post periodically, report RAPERB2000.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.

Period 12 · year end

Finish the year

The last month runs the full routine. In SAP S/4HANA the general ledger balance carryforward also opens the next year in Asset Accounting, and it can be started already in this period.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets, only items with a distribution rule.
  • AFAB Post depreciationThe run posts the planned depreciation of the period to every ledger.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.
  • RAAFAR00 Recalculate depreciationNeeded when the Customizing of a depreciation key changed; master data changes recalculate on their own.
  • FAGLGVTR Carry forward balancesOpens the new year in Asset Accounting too, and can start in the last posting period of the old year.
  • S_ALR_87011990 Check the asset history sheetSAP GUI report, program RAGITT_ALV01; in Fiori, the Asset History Sheet app (F1615).

Period 12 · year end

Finish the year

The last month runs the full routine, plus a reconciliation of Asset Accounting with the general ledger before the year can be closed.

  • AIBU Settle assets under constructionMoves the costs of finished AuC to the final assets.
  • AFAB Post depreciationPosts depreciation of the areas that post to the G/L.
  • ASKB Periodic APC postingPosts the values of areas set to post periodically, report RAPERB2000.
  • AW01N Check single assetsAsset Explorer: planned against posted values, per area.
  • AFAR Recalculate depreciationNeeded when depreciation key settings changed.
  • ABST2 Reconcile with the G/LReport RAABST02 lists accounts where G/L and asset balances differ.
  • S_ALR_87011990 Check the asset history sheetSAP GUI report, program RAGITT_ALV01.

After the audit

Close the old year

The balance carryforward can open a new year only if the year before the current one is closed in Asset Accounting, so in practice no more than two years are open. Close Asset Accounting before the general ledger once the old year’s figures are final.

  • AJAB Year-end closingIn SAP S/4HANA 2023 it opens Year-End Closing Asset Accounting (Cross-Company Code and Ledger), program FAA_CLOSE_FISCAL_YEARS; the same closing exists as a job template.
  • OAAR Reopen areas if neededReopens a closed year for selected depreciation areas; KBA 2816495 lists it for SAP S/4HANA.

After the audit

Close the old year

Year-end closing locks the old year once depreciation is fully posted and every asset of the year is complete and capitalized.

  • AJAB Year-end closingProgram RAJABS00, with a test run.
  • OAAR Reopen areas if neededReopens a closed year for selected depreciation areas.
  • Every month
  • Year start or year end
  • Only when needed

The year-end screens are drawn from SAP S/4HANA 2023. Switch the release to SAP S/4HANA to see them.

On screen · SAP S/4HANA 2023

The year end in three screens

Three SAP GUI screens redrawn from an SAP S/4HANA 2023 system, in year-end order: check the asset history sheet, close the year, and know where to look when the closing stops. The values are an example. Pick a number to find the field.

Screen
?Asset History SheetiCompany code1010toAsset numbertoSubnumbertoSelectionsAsset classtoBusiness areatoSettingsReport date31.12.2026Depreciation area01Book DeprctnSort Variant0001Co. code/bus. area/bal. item/B/S accList assets... or main numbers only... or group totals onlyDisplay optionsUse ALV gridFurther selectionsDepreciation keytoFurther settingsHistory sheet version0001In compl. w/EC directive 4 (13 col.,wide version)Depreciation postedRetirmt simulationsLow value assets classestoLVA simulation period fromToIntangible assets classesto

Pick a number below to zoom into its field.

Which assetsCompany code, asset number and subnumber, each with a to field and a multiple selection button. Asset class and business area narrow the run further.

Report dateThe key date of the sheet. For the year end, the last day of the fiscal year.

Depreciation areaOne area per run: 01, book depreciation, in this example. For another valuation, run it again with that area.

Level of detailEvery asset, main numbers only, or group totals only, which is the choice here.

ALV gridTick Use ALV grid to show the result in the ALV grid. Not ticked in this example.

History sheet versionDecides the layout of the sheet: which values go in which lines and columns. 0001 in this example, described on screen as in line with EC Directive 4 (13 columns, wide version).

Redrawn from an SAP S/4HANA 2023 system. The values are an example.

S_ALR_87011990 Asset History Sheet

Program RAGITT_ALV01. In Fiori: the Asset History Sheet app (F1615).

?Year-End Closing Asset Accounting (Cross-Company Code and Ledger)iClosing ParametersCompany Code1010toLedgertoFiscal Year to Be ClosedTest Run ParametersTest RunOutput OptionsLayout

Pick a number below to zoom into its field.

Company codesA range or a list of company codes in one run, hence Cross-Company Code in the title.

LedgersThe closing works per ledger, so one run can close one ledger or several.

Fiscal year to be closedRequired: the tick in the empty field marks a mandatory entry. Once closed, the year takes no more asset postings; if really needed, OAAR reopens it for selected depreciation areas.

Test runTicked here. Run the test first, check the result, then run it again without the tick.

Redrawn from an SAP S/4HANA 2023 system. The values are an example.

AJAB Year-End Closing Asset Accounting (Cross-Company Code and Ledger)

Program FAA_CLOSE_FISCAL_YEARS. The same closing runs as a job in Schedule Asset Accounting Jobs (F1914).

?Display Settings for Company Code in Asset AccountingFI-AA Company CodeText1010Company Code 10100LIFRS1110Company Code 11101210Company Code 12101310Company Code 13101510Company Code 15101610Company Code 16101710Company Code 17101910Company Code 1910General InformationCompany Code1010Company Code 1010Chart of AccountsYCOAStandard Chart of AccountsCountry/Region KeyDEGeneral SettingsLegacy Data TransferGeneral Settings for Company CodeCompany Code Status0 For TestingCompany Code Locked

Pick a number below to zoom into its field.

Display or changeThe screen opens in display mode; the pencil switches to change mode.

Company codes and ledgersEach company code opens to its ledgers: here 1010 with ledger 0L, shown with IFRS.

General informationThe company code with its chart of accounts and country/region key.

Legacy Data Transfer tabHolds the legacy data transfer date. When AJAB stops with FAA_CMP030, that date falls in a closed fiscal year: check it here.

Company code statusThe company code’s status in Asset Accounting, 0 For Testing in this example.

Company code lockedShows whether the company code is locked in Asset Accounting. Not set in this example.

Redrawn from an SAP S/4HANA 2023 system. The values are an example.

FAA_CMP Display Settings for Company Code in Asset Accounting

Status, lock and legacy data transfer per company code. Error FAA_CMP030 is explained in the Error decoder.

The full monthly and annual close, FI and CO, is on Period-end closing.

Sources: SAP Learning, fiscal year change and closingSAP Learning, closing in Asset AccountingSAP Learning, year-end closing (cloud)SAP Help (ERP), posting depreciation

Evolution

What changed from SAP ERP to SAP S/4HANA

New Asset Accounting is optional in SAP ERP and the only option in SAP S/4HANA. SAP describes the change in simplification item SAP Note 2270388, S4TWL - Asset Accounting: Parallel valuation and journal entry. The rows below are the differences you feel in daily work.

SAP ERP (ECC) × SAP S/4HANA
TopicSAP ERP (ECC), classic Asset AccountingSAP S/4HANA
Which Asset AccountingClassic Asset Accounting; new Asset Accounting can be switched on from enhancement package 7, support package 02, with business function FIN_AA_PARALLEL_VAL.New Asset Accounting only.
Where the values liveSeparate asset tables: ANLC, ANEP, ANEA, ANLP and ANEK.Actual values in the Universal Journal, ACDOCA, with headers in BKPF. Compatibility views named FAAV_<table> keep old reads working. Statistical items go to FAAT_DOC_IT, planned values to FAAT_PLAN_VALUES.
Parallel valuationsOne area per chart of depreciation posts online; the others post periodically or as delta areas.Every valuation posts full values in real time, one document per accounting principle.
Leading areaArea 01 is the master area.No leading area; area 01 does not have to belong to ledger 0L.
Integrated acquisitionVendor and asset in one document.One operational document plus one valuating document per accounting principle, through the technical clearing account.
Reconciliation with the G/LABST2 (report RAABST02) compares Asset Accounting with the G/L.Nothing to reconcile: SAP says the Universal Journal removed the need for G/L-to-Asset Accounting reconciliation.
Depreciation runPlanned, repeat, restart and unplanned runs; collective documents; smoothing or catch-up when planned depreciation changes during the year.Program FAA_DEPRECIATION_POST posts values calculated in advance. Smoothing is no longer available and automatic adjustments use the catch-up method (KBA 3391570). From 1809 the run no longer writes BSEG (SAP Note 2383115).
New fiscal yearAJRW opens the year in Asset Accounting.FAGLGVTR, the general ledger balance carryforward, opens it.
Year-end closingAJAB, program RAJABS00, per company code.AJAB opens Year-End Closing Asset Accounting (Cross-Company Code and Ledger), program FAA_CLOSE_FISCAL_YEARS in SAP S/4HANA 2023, with company code and ledger ranges. SAP dates closing per ledger or area in FAA_CMP to 1909, and the redirect of AJAB to FAA_CLOSE_FISC_YEARS to 2020.
Transaction types per areaTransaction types can be limited to depreciation areas.Only for revaluation and investment support; old restricted types can no longer be used.
Main screensSAP GUI: AS01, AS02, AW01N and the classic reports.The same transactions plus Fiori apps: Manage Fixed Assets (F1684), Asset Balances (F1617), Asset History Sheet (F1615), Asset Transactions (F1614), Schedule Asset Accounting Jobs (F1914).
Universal Parallel AccountingNot available.First in SAP S/4HANA Cloud Public Edition 2105, where asset postings became ledger-specific; then SAP S/4HANA 2022 and Cloud Private Edition for new implementations, with up to ten currencies.

Sources: KBA 3391570KBA 2341498SAP blog, key aspectsSAP blog, what is new in 2020SAP Learning, parallel accountingSAP blog, Universal Parallel AccountingSAP blog, asset postings with UPASAP blog, 2022 product update

Configuration

The setup map, in the order it is built

The order follows the Customizing menu and SAP’s Asset Accounting course for SAP S/4HANA; SAP does not publish one mandatory sequence. Tick the steps as you go: nothing is saved anywhere.

of 10 steps ticked

Paths are from SAP S/4HANA; older releases say Valuation where SAP S/4HANA says General Valuation. The Consultant view shows the Customizing path of each step. Sources: SAP Learning, organizational structuresSAP Learning, components of an asset classSAP Learning, parallel accountingSAP Learning, depreciation keys and postingSAP Help (ERP), transaction typesKBA 2936797 (OAK6)

Reference

The FI-AA toolbox

Transactions, Fiori apps, tables, programs and Customizing in one list. Search by code or by word, or filter by kind. The last column says how each item stands in SAP S/4HANA.

Kind

CodeKindWhat it isIn SAP S/4HANA
AS01TransactionCreate assetThe class proposes the defaults.Current
AS02TransactionChange assetAlso where time-dependent depreciation terms get new intervals.Current
AW01NTransactionAsset ExplorerPlanned and posted values per area and year, simulation, jump to documents.Current
F-90TransactionAcquisition integrated with Accounts Payable, no purchase orderFiori tile: Post Acquisition (Integrated AP) without Purchase Order.Current
ABZONTransactionAcquisition with automatic offsetting entryNon-integrated: the asset is posted against a clearing account.Current
AB01LTransactionAsset posting in one accounting principleCorrects acquisition values for a single accounting principle.Current
AIABTransactionDistribute assets under constructionMaintains the distribution rules of AuC line items.Current
AIBUTransactionSettle assets under constructionPosts the settlement of the items that have a rule.Current
ABNANTransactionPost-capitalizationCosts that belong to an earlier year (KBA 3770275).Current
ABUMNTransactionTransfer within a company codeGross method: cost and accumulated depreciation move together.Current
ABT1NTransactionTransfer to another company codeUses transfer variants and the gross, net or new-value method.Current
F-92TransactionRetirement with revenue, with customerTransaction type 210 for prior-year acquisitions.Current
ABAONTransactionRetirement with revenue, without customerSale against a clearing account.Current
ABAVNTransactionRetirement by scrappingNeeds the loss account for retirements without revenue.Current
AB08TransactionReverse an asset documentThe depreciation run itself cannot be reversed.Current
AFABTransactionDepreciation runTest run first; runs program FAA_DEPRECIATION_POST in SAP S/4HANA.Current
AFARTransactionRecalculate depreciationAfter Customizing changes to depreciation keys.Current
FAGLGVTRTransactionBalance carryforwardOpens the new year in Asset Accounting too.Current
AJABTransactionYear-end closingIn SAP S/4HANA 2023: Year-End Closing Asset Accounting (Cross-Company Code and Ledger), program FAA_CLOSE_FISCAL_YEARS.Current
FAA_CLOSE_FISC_YEARSTransactionYear-end closing for several company codes and ledgersFrom SAP S/4HANA 2020; AJAB is redirected to it.Current
FAA_CMPTransactionCompany code settings for Asset AccountingStatus, lock and legacy data transfer per company code, with its ledgers in a tree; closing per ledger or area from 1909.Current
S_ALR_87011990TransactionAsset History Sheet in SAP GUIProgram RAGITT_ALV01; the Fiori app is Asset History Sheet (F1615).Current
OAARTransactionReopen a closed year for selected areasListed for SAP S/4HANA in KBA 2816495.Current
AS91TransactionLegacy asset: master recordIn SAP S/4HANA the values follow in ABLDT.Current
ABLDTTransactionLegacy asset: transfer valuesAn editable ALV grid: no batch input or LSMW (SAP Notes 311440, 554635).Current
ABLDT_OITransactionLegacy asset under construction: open itemsTransaction types 900 and 910.Current
AS100TransactionLegacy assets from ExcelUp to 5,000 assets per file.Current
AR01TransactionAsset list, start of a worklistThe list from which a worklist for mass changes is generated.Current
AR31TransactionProcess a worklistMass change through a substitution rule.Current
ASKBTransactionPeriodic APC postingClassic: posted areas set to post periodically, report RAPERB2000.Not used
ABST2TransactionReconcile Asset Accounting with the G/LClassic report RAABST02.Not needed
AJRWTransactionFiscal year change in Asset AccountingClassic year opening.Replaced by FAGLGVTR
F1684Fiori appManage Fixed AssetsCreate, change and analyse assets; tabs Compare Values and Life Cycle.Current
F1617Fiori appAsset BalancesBalances by various criteria, with key figure groups for planned and posted values.Current
F1615Fiori appAsset History SheetThe year-end report, with drill-down to the asset.Current
F1614Fiori appAsset TransactionsAsset postings by transaction type; filters for depreciation postings since 2020.Current
F1914Fiori appSchedule Asset Accounting JobsDepreciation run, recalculation and year-end closing as jobs (from 1610).Current
F1596Fiori appCarry Forward BalancesThe Fiori face of FAGLGVTR.Current
ACDOCATableUniversal JournalActual asset values in SAP S/4HANA, with the asset number on each line.Current
FAAT_DOC_ITTableStatistical asset line itemsValues that used to sit in the classic asset tables.Current
FAAT_PLAN_VALUESTablePlanned valuesPlan data that used to sit in ANLP and ANLC.Current
ANLA · ANLZTableAsset master dataFields of both tables can be offered when creating several assets at once.Current
ANLC · ANEP · ANEA · ANLP · ANEKTableClassic asset value and document tablesActual data now in ACDOCA, read through compatibility views FAAV_<table>.Replaced by ACDOCA
TABWATableTransaction types limited to areasCheck and clean it after copying a reference chart.Current
T090NPTablePeriod control methodsMaintained with AFAMP.Current
FAA_DEPRECIATION_POSTProgramDepreciation runBehind AFAB and the depreciation posting job.Current
RAPOST2001ProgramDepreciation run logPeriodic Processing › Depreciation Run › Display Log.Current
RAAFAR00ProgramMass recalculation of depreciationAS02 does it for one asset.Current
FAA_CLOSE_FISCAL_YEARSProgramYear-end closing program behind AJABCompany code and ledger ranges, test run; seen in SAP S/4HANA 2023.Current
RASIMU_ALV01ProgramDepreciation simulationForecasts future years with simulation versions.Current
RAAEND01ProgramChange documents of asset master recordsWho changed which field, old and new values.Current
RAFAB_COPY_AREAProgramNew depreciation area for insurable valuesFrom 1809, built for adding an insurable-values area to an existing valuation in a productive system. SAP ERP used RAFABNEW, which is not available in SAP S/4HANA.Current
RASFIN_MIGR_PRECHECKProgramAsset Accounting pre-check for the conversionChecks Asset Accounting before the conversion to SAP S/4HANA.Current
RAPERB2000ProgramPeriodic APC postingClassic report behind ASKB.Not used
OAOBCustomizingAssign chart of depreciation to company codeCurrent
OAOACustomizingDefine asset classesAlso the base unit for collective low-value assets.Current
OADBCustomizingDefine depreciation areasAccounting principle and posting indicator.Current
OABC · OABDCustomizingTake over values and terms from another areaAPC values and depreciation terms.Current
OAYZCustomizingDepreciation areas in the asset classDeactivate areas, default keys and lives.Current
AO90CustomizingAssign G/L accountsPer chart of accounts, account determination and area.Current
AFAMACustomizingMaintain depreciation keyAssigns the calculation methods.Current
AFAMP · AFAMRCustomizingPeriod control method · base methodTwo of the calculation methods.Current
OAYRCustomizingPosting rules of depreciation areasPosting cycle per area.Current
OAK6CustomizingConsistency check of FI-AA CustomizingRun after the setup.Current

Current means an SAP S/4HANA source or SAP’s current documentation lists the item. Several posting transactions also exist as accounting-principle versions ending in L, such as ABZOL, ABUML and ABAVL.

Troubleshooting

Error decoder

Messages that come back again and again in Asset Accounting, each with the SAP note or knowledge base article behind it. Most SAP articles show only the symptom without a login; where the public preview gives the cause or the fix, it is used here, otherwise the rule comes from SAP Learning.

Message or symptom

FAA_POST031

Clearing account already in account determination

What you seeAccount &1 is already used in automatic account determination (T095)

When it happens

Posting an asset acquisition, for example with FB01.

Why it happens

Likely cause, from SAP’s rule for integrated acquisitions: the technical clearing account must be a balance sheet account set up as an asset reconciliation account, and it must not be one of the accounts in Asset Accounting account determination.

What to do

Use a dedicated account as the technical clearing account and keep it out of Assign G/L Accounts. Postings to it are only made by the system.

KBA 3765018 · SAP Learning, processing acquisitions

AA821

Company code not in Asset Accounting

What you seeCompany code & not defined in Asset Accounting

When it happens

On premise, when running FAA_CMP (SAP S/4HANA 1709 to 2021). In the public cloud, when opening the company code settings app.

Why it happens

On premise the message says the company code is not defined in Asset Accounting; SAP’s full article (KBA 2778936) needs a login. In the public cloud, SAP says the company code’s runtime settings were not synchronized with the configuration.

What to do

On premise, check the company code’s Asset Accounting settings and follow KBA 2778936. In SAP S/4HANA Cloud Public Edition, SAP’s article says to choose Continue in FAA_CMP when it reports differences, or press Synchronize Company Codes in app F7312.

KBA 2778936 · KBA 2909548

ACC_AA081

Activation check: area 01 without ledger group

What you see, in plain wordsChart of depreciation 0XX: assign a target ledger group to area 01

When it happens

In Check Prerequisites for Activating Asset Accounting (New). ACC_AA130 can follow, and OAPL may report the chart as not defined (AC247).

Why it happens

SAP’s article: every depreciation area needs a target ledger group, and area 01 of the chart named in the message has none.

What to do

Assign a target ledger group to area 01 of that chart and meet the prerequisites under Prepare New Asset Accounting, then run the check again.

KBA 2602897

AU133

Account not found for an area

What you seeAccount … could not be found for area …

When it happens

In the depreciation run, in AuC settlement (AIBU), in periodic posting (ASKB) or when scrapping with ABAVN.

Why it happens

The transaction needs a G/L account that account determination does not give for that depreciation area. SAP has several articles on it, for example for a deactivated area and for the loss account of a retirement without revenue.

What to do

Maintain the missing account for that area and transaction in Assign G/L Accounts, or check whether the area should post at all.

KBAs 2804196, 2044787, 1594183, 2007342

AAPO126

Value date and posting date in different years

What you see, in plain wordsAsset value date and posting date are not in the same fiscal year

When it happens

Posting an acquisition with ABZON, or any acquisition with a back-dated value date.

Why it happens

SAP requires the posting date and the asset value date of an acquisition to be in the same fiscal year.

What to do

Use a value date in the posting’s fiscal year. Costs that belong to an earlier year go through post-capitalization (ABNAN); SAP’s Cloud article says to use a posting date in the lowest open fiscal year (message AAPO012 otherwise).

KBA 2950011 · KBA 2935975

AA324

AuC settlement: no acquisition in a ledger

What you seePosting with trans.type 340 not possible (No acquisition posted)

When it happens

In SAP S/4HANA Cloud Public Edition, settling an asset under construction in Execute Settlement - For AuC (AIBU).

Why it happens

The settlement checks that every ledger of the asset has an acquisition; if one does not, the error is the intended behaviour.

What to do

Review the depreciation areas of the AuC and post or correct the missing acquisition.

KBA 2945269

AW001

Legacy AuC: no line items to settle

What you seeThere are no line items.

When it happens

In SAP S/4HANA Cloud, settling a legacy asset under construction in AIBU.

Why it happens

The takeover values were not transferred as line items. AuC cannot take cumulative values.

What to do

Reverse the takeover values and enter them again with ABLDT_OI, transaction types 900 (open items) and 910 (open down payments).

KBA 2949478

AA761

New year blocked by the old one

What you seeFiscal year change in co.code XXXX possible only after year-end closing YYYY

When it happens

Opening a new year: AJRW in SAP ERP, FAGLGVTR in SAP S/4HANA.

Why it happens

The balance carryforward can open a new year only if the year before the current one is closed in Asset Accounting.

What to do

Run the year-end closing for the oldest open year first, then the balance carryforward.

KBA 2584908 · SAP Learning, year-end closing

FAA_CMP030

Year-end closing stopped by legacy settings

What you seeLegacy data transfer date &1 is in a closed fiscal year

When it happens

Running the year-end closing (AJAB) in SAP S/4HANA.

Why it happens

The message itself says that the legacy data transfer date of the company code lies in a fiscal year that is already closed. The cause is detailed in the full KBA.

What to do

Check the legacy data transfer date on the Legacy Data Transfer tab of FAA_CMP against the closed years. The steps are in the KBA, which needs an SAP login. In SAP S/4HANA Cloud Public Edition the same message appears when closing the year in the company code settings app (KBA 2887995).

KBA 3078166

No document

The run posts nothing for an asset

What you see, in plain wordsThe depreciation run posts no document for all or some areas

When it happens

SAP S/4HANA Cloud Public Edition, after changes to an asset.

Why it happens

No planned depreciation had been calculated when the run started.

What to do

Recalculate depreciation in Manage Fixed Assets or with the Schedule Asset Accounting Jobs app, then run again.

KBA 2963347

Documented tips

15 documented tricks that save hours

Each tip is backed by SAP Learning, SAP Help or an SAP knowledge base article. Tips found only in forums and personal blogs were left out.

Audience
  • 01Key users

    Type * as the subnumber

    In the Asset Explorer, an asterisk in the subnumber field shows the main asset together with all its subnumbers, so you see the whole machine and not one part of it.

    • AW01N
    SAP Learning, depreciation and transaction simulation
  • 02Key users

    Simulate before you post

    The Asset Explorer can preview how values would change with a simulated transaction or with different depreciation terms, and Display Dep. Calc. shows the calculation step by step.

    • AW01N
    SAP Learning, depreciation and transaction simulation
  • 03Key users

    Retire without waiting for the run

    You do not have to post the period’s depreciation before a retirement. The system works out the depreciation up to the period derived from the asset value date, using the planned values; the run can come afterwards.

    • F-92
    • ABAVN
    SAP Learning, posting retirements
  • 04Key users

    Reverse a credit memo with its acquisition

    If an acquisition has a credit memo, reverse both together. Reversing only the acquisition would leave a negative book value, and the system stops it.

    • AB08
    SAP Learning, correcting capitalized assets
  • 05Key users

    There is no undo for a depreciation run

    A posted run cannot be reversed. Running it again for the same period posts the difference as a separate journal entry, so always look at the test run first.

    • AFAB
    SAP Learning, performing a depreciation run
  • 06Key users

    A new cost center can move the asset by itself

    If a new time-dependent cost center derives a different profit center or segment, saving the asset posts a transfer automatically, and later depreciation goes to the new cost center, profit center and segment.

    • AS02
    SAP Learning, correcting capitalized assets
  • 07Key users

    Change hundreds of assets in one go

    Define a substitution rule, build a worklist from an asset list, process it, then check the result in the change documents. Mass changes use workflow, so its basic settings must be in place (SAP Note 127931).

    • AR01
    • AR31
    • RAAEND01
    SAP Learning, mass changes
  • 08Consultants

    Key changes need a recalculation

    Master data changes recalculate planned depreciation on their own. Changing the Customizing of a depreciation key does not: recalculate with AS02 for one asset or RAAFAR00 for many.

    • AS02
    • RAAFAR00
    SAP Learning, depreciation keys · preparing a run
  • 09Consultants

    Make term changes time-dependent

    A change to the useful life or depreciation key recalculates all open fiscal years. Entered as a new time-dependent interval, it only affects the periods from the change onwards.

    • AS02
    SAP Learning, depreciation keys and posting
  • 10Consultants

    Clean TABWA after copying a chart

    Copying a reference chart of depreciation copies old transaction-type restrictions too. New Asset Accounting needs them only for revaluation and investment support, so check TABWA and delete the rest.

    • TABWA
    SAP Learning, organizational structures
  • 11Consultants

    Accounts follow the chart of accounts

    Account determination works per chart of accounts, not per chart of depreciation. Two company codes with the same chart of accounts cannot have different asset reconciliation accounts just because their charts of depreciation differ.

    • AO90
    SAP Help (ERP), account determination
  • 12Consultants

    Own transaction types need X, Y or Z

    A customer transaction type key must contain X, Y or Z somewhere in its three characters, so that an upgrade does not overwrite it.

    • AO73
    SAP Help (ERP), transaction types
  • 13Consultants

    Legacy values: no LSMW on ABLDT

    ABLDT is an editable grid, so batch input and LSMW cannot drive it (SAP Notes 311440 and 554635). AS100 uploads up to 5,000 assets per Excel file, and wrong takeover values are reversed and posted again, never edited.

    • ABLDT
    • AS100
    SAP Learning, entering legacy data
  • 14Consultants

    Smoothing is gone in SAP S/4HANA

    The smoothing indicator no longer appears in the depreciation posting settings, and automatic adjustments use the catch-up method.

    • OAYR
    KBA 3391570
  • 15Consultants

    Planned periods with an alternative fiscal year variant

    With a parallel ledger on an alternative fiscal year variant, the Asset Explorer shows planned periods by the representative ledger’s variant. SAP calls this the intended behaviour, not a bug.

    • AW01N
    KBA 2490222 (on SAP Note 2220152)

Evolution

How Asset Accounting got here

Release names, not calendar dates, because SAP’s own sources speak in releases. Gold marks the turning points.

  1. R/3Classic FI-AAOne depreciation area posts to the general ledger online; the other valuations post periodically or directly.SAP Help (ERP), parallel valuation
  2. 2005mySAP ERP 2005A new depreciation calculation with period intervals and time-dependent depreciation terms, active with the EA-FIN extension.SAPinsider, 2007
  3. EhP7SAP ERP 6.0, SP02New Asset Accounting arrives as business function FIN_AA_PARALLEL_VAL: every valuation posts in real time.KBA 2341498
  4. 1511SAP S/4HANAThe Universal Journal holds asset values, so Asset Accounting no longer needs reconciling with the general ledger.SAP blog, what is new in 2020
  5. 1709FioriManage Fixed Assets arrives; Schedule Asset Accounting Jobs had replaced Manage Depreciation Runs in 1610.SAP blog, what is new in 2020
  6. 1809Simpler dataThe depreciation run stops writing BSEG, and RAFAB_COPY_AREA adds an insurable-values depreciation area in a productive system.SAP blogs, key aspects · new in 2020
  7. 2020Year-end closingFAA_CLOSE_FISC_YEARS closes several company codes and ledgers in one run and AJAB is redirected to it; FAA_CMP had brought closing per ledger in 1909.SAP blog, what is new in 2020
  8. 2022Universal Parallel AccountingSAP S/4HANA 2022 and Cloud Private Edition bring it to new implementations, after SAP S/4HANA Cloud Public Edition 2105, with up to ten currencies.SAP blog, Universal Parallel Accounting

Myths

Things people get wrong about Asset Accounting

  • MythArea 01 is always the leading depreciation area.

    FactIn SAP S/4HANA no area leads, and area 01 does not have to belong to ledger 0L. It was the master area only in classic SAP ERP.

  • MythIn SAP S/4HANA depreciation posts in real time.

    FactPlanned depreciation is recalculated with every change, but the depreciation run still posts it to the ledgers, period by period.

  • MythDepreciation must be posted before an asset is retired.

    FactPlanned depreciation is enough. The system works out the retired depreciation up to the period derived from the asset value date.

  • MythA wrong depreciation run can be reversed.

    FactIt cannot. Running it again for the period posts the correction as a separate journal entry.

  • MythChanging a depreciation key in Customizing updates every asset.

    FactAssets already in use keep their values until you recalculate them.

  • MythYear end in SAP S/4HANA still needs ABST2 and AJRW.

    FactAssets and the general ledger share one journal entry, and FAGLGVTR opens the new year in Asset Accounting.

Frequently asked questions

What is SAP FI-AA?

FI-AA, Asset Accounting, is the part of SAP Finance that manages fixed assets as a subledger: one master record per asset, its values in one or more depreciation areas, and every acquisition, transfer, depreciation and retirement posted to the general ledger.

What is a depreciation area?

A depreciation area holds one set of values for an asset, such as book, tax, IFRS, local GAAP or cost accounting; one valuation can need one or more areas. It has a two-digit key, its own depreciation terms and a posting indicator that says whether and how it posts to the general ledger.

What is the technical clearing account in SAP S/4HANA?

It links the two parts of an integrated asset acquisition: the operational document for the vendor invoice, valid for all ledgers, and one valuating document per accounting principle that capitalizes the asset. It must be a balance sheet reconciliation account for assets, outside Asset Accounting account determination, and its balance is always zero.

Is the depreciation run still needed in SAP S/4HANA?

Yes. Planned depreciation is recalculated with every asset transaction, but the depreciation run (AFAB, or the Schedule Asset Accounting Jobs app) still posts it each period. What disappeared is the periodic posting of parallel areas with ASKB.

How does the new fiscal year open in Asset Accounting in SAP S/4HANA?

With the general ledger balance carryforward, FAGLGVTR or the Carry Forward Balances app (F1596). It opens the new year in Asset Accounting too and can start in the last posting period of the old year. SAP ERP used AJRW.

How many fiscal years can be open in Asset Accounting?

In practice two. The balance carryforward can open a new year only if the year before the current one is closed in Asset Accounting, and SAP’s Cloud Public Edition course states the two-year limit outright. The same course says only the last closed year can be reopened, and a year certified by an external auditor must not be.

Which Fiori apps cover Asset Accounting?

The main ones are Manage Fixed Assets (F1684), Asset Balances (F1617), Asset History Sheet (F1615), Asset Transactions (F1614) and Schedule Asset Accounting Jobs (F1914) for the depreciation run, recalculation and year-end closing.

When do I need to recalculate depreciation?

After changing the Customizing of a depreciation key, because assets already in use keep their old values. Changes to an asset’s master data and postings on the asset recalculate planned depreciation automatically.

What does Universal Parallel Accounting change for assets?

SAP introduced it in SAP S/4HANA Cloud Public Edition 2105, where asset postings became ledger-specific, and in SAP S/4HANA 2022 and Cloud Private Edition for new implementations. Up to ten currencies are calculated and posted in parallel; SAP Note 3191636 describes the 2022 scope.

References

Checked in November 2026. SAP Learning pages are the SAP S/4HANA courses unless marked cloud; old SAP Help pages describe SAP ERP. SAP notes and knowledge base articles need an SAP for Me login beyond the public preview. The screens of AJAB, FAA_CMP, S_ALR_87011990, OADB, OABC and OABD were also checked in an SAP S/4HANA 2023 system.

Reference group